90W Poe Switch Gigabit Ethernet Switch L2 Managed af/at/bt
Network Switch DC48V Input
Key Features of 2.5G managed Industrial Network Switch
▪8x 10/100/1000Base-T RJ-45 and 2x 100/1000/2500Base-FX SFP Fiber
▪2 Copper/MSA Fiber Combo ports ( Port 9, 10, and FX1, FX2)
▪Supports negative RS-232 console port
▪Cable diagnostic, Measuring cable normal or broken point distance
▪Redundant input power 48VDC (48~57VDC) or 100-240VAC
Management Interface
▪STP, RSTP, MSTP, ITU-T G.8032 Ethernet Ring Protection Switching
(ERPS) for redundant cabling
▪Supports Green Ethernet IEEE802.3az EEE (Energy Efficient
Ethernet) management to optimize the power consumption
▪DHCP Server/Client/Relay/Snooping/Snooping option 82/Relay option
82
▪QoS, Traffic classification QoS, CoS, bandwidth control for
Ingress and Egress, Storm Control, DiffServ
▪IEEE802.1q VLAN, MAC based VLAN, IP subnet based VLAN, Protocol
based VLAN, VLAN translation, GVRP, MVR
▪Dynamic IEEE 802.3ad LACP Link Aggregation, Static Link
Aggregation
▪IGMP snooping V1/V2/V3, IGMP Filtering/ Throttling, IGMP query,
IGMP proxy reporting, MLD snooping V1/V2
▪Security : Port based and MAC based IEEE802.1X, RADIUS, ACL,
TACACS+, HTTP/HTTPS, SSL/SSH v2
▪Software upgrade via TFTP and HTTP, redundant firmware to avoid in
case of upgrade failure
▪Supports IEEE1588 PTP V2 for precise time synchronization to
operate in Ordinary-Boundary, Peer to Peer Transparent Clock, End
to End Transparent Clock, Master, Slave mode by each port
▪RMON, MIB II, Port mirroring, Event syslog, DNS, NTP, IEEE802.1ab
LLDP
▪Supports IPv6 Telnet server /ICMP v6
▪CLI, Web based management, SNMP v1/v2c/v3, Telnet server for
management
Application
Packing List:
| PACKING LIST | CONTENT | QTY | UNIT |
| 2.5G managed industrial PoE switch | 1 | SET |
| User Manual | 1 | PC |
| Warranty Card | 1 | PC |
| Removable Terminal Block | 1 | PC |
| Note: Industrial Managed POE Switch does not include the power
supply and SFP module. |
FAQ:
1.What is the power input?
A: For non-PoE managed switches, it receives DC12V~57V, for PoE
managed switches, it receives DC48V~57V.
All the models support redundant input.
2.Does your switch support 155Mb/s tranceivers?
A: Yes, the optical speed is 100M/1000M/2500M. Please just
configure 100M speed in the management interface, megabit modules
are working.
3.Can you supply a customized PVC label with my model on it?
A: Yes, there is description, model name and logo on the front PVC
mask, all is available for customization.
4.What is the packing list?
A: There is a device, protective foam, a user manual, a warranty
card and a console cable in the box.
But SFP modules and power supply are NOT included, please purchase
it from us separately.
5.What is the PoE output voltage?
A: Its DC48V for 802.3af/802.3at/802.3bt compliant powered devices
such as PoE cameras or PoE routers.
If the PD takes 24V power, then please use a PoE splitter to
connect our switch and powered device.
