12-48v DC hardened 10/100/1000mbps
mini unmanaged network switch poe switch
Introduction of 5 port unmanaged switch:
IM-WP054BGE series is the 10/100/1000 Mbps industrial POE network
switch, comply with IEEE802.3af/at, power on POE IP cameras through
the Ethernet cable, simple construction, power range up to 100
meters, operating temperature-40 ℃ to + 75 ℃, meet IP40 protection
degree and EMC industrial grade requirements, DIN rail
installation, pass through dangerous environmental certification
and comply with FCC and CE standards. The reliable industrial grade
design could ensure continuous and stable operation of the
automation system.
Specification of voltage booster switch
| Product Name | 10/100/1000Mbps Industrial POE Network Switch (5TP) |
| Model No. | IM-WP054BGE |
| Port | 1 x 10/100/1000Mpbs uplink network port 4 x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) |
| Switching features | Transmission mode:storage and forward System bandwidth:40Gbps (non-traffic jam) DRAM size: 128M Flash size: 16M
Packet buffer size: 4Mb |
| Network media | 10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m) |
| LEDs | Power, network |
| Power supply | POE power supply input voltage: DC12V-48V Single PoE power supply output power: 15.4W (port 1~4) (802.3at standards required special instructions) |
| Environment | Working temperature:-40°～ 75°C Storage temperature:-40°～ 85°C Working humidity:10%～90%,non-condensing Storage humidity:10%～95%,non-condensing |
| Industry Standards | EMI:FCC Part 15 Subpart B Class A,EN 55022 Class A EMS:EN 61000-4-2 (ESD) Level 3,EN 61000-4-3 (RS) Level 3, EN
61000-4-4 (EFT) Level 3,EN 61000-4-5 (Surge) Level 3, EN 61000-4-6
(CS) Level 3,EN 61000-4-8 Traffic Control:NEMA-TS2 Vibration:IEC 60068-2-6 Freefall:IEC 60068-2-32 Shock:IEC 60068-2-27 Rail Traffic:EN 50121-4 |
| Safety | CE Mark ,commercial CE/LVD EN60950 |
| Mechanical information | Shell:Corrugated metal shell Safety class:IP40 Dimension: 113.8 x 93 x 34.9mm Mounting method:Din-rail mounting |
| Warranty | 3 years |
Application of unmanaged switch
Packing box of Din rail unmanaged switch:
- Put the product in an ESD Bag, then placed in PE foams with outer
carton packaging.
- The standard packing usually contains a main device, a warranty
card and a user manual.
- Packing box dimension for 1pc: 23*16.5*5.8cm
- 40pcs in a packing box of 67*33*47cm dimension.
FAQ:
1. Q: How does this Industrial 5 Ports Gigabit POE+ Network Switch
compare to other standard POE switches?
A: This 5port PoE switch features a built-in voltage booster which
enables it to utilize a power input range of 12-48VDC, whereas
typical POE switches support 48VDC input only.
2. Q: Does this industrial 5 ports PoE switch support 24VDC power
output?
A: No, this product doesn't support passive 24VDC PoE devices, and
it supports standard IEEE802.3af/at PoE 48VDC devices only.
3. Q: Is it a managed industrial network switch?
A: It is unmanaged industrial network switch and no need any
setting. It is plug and play, easy to use.
4. Q: What's is the PoE Pin Assignment of this Industrial 5 Ports
POE+ Network Switch?
A: It supports both 1/2 (V+),3/6 (V-) and 4/5 (V+),7/8 (V-).
5. Q: Can i use it with one Non-PoE devices?
A: Yes, sure. If one Non-PoE devices is connected with this
industrial 5port PoE switch. The industrial 5port PoE switch will
provide data only, and don't provide power any more.
