Gigabit 5 port industrial ethernet switch solar poe switch support
12V/24V/48V
Key Features of 5 port solar poe switch:
- Support power on POE IP cameras through the wireless access point
(AP) of 5 categories of Ethernet cable.
- IEEE 802.3af/at power on to 1 ~ 4 RJ45 ports
- 4 x 10/100/1000Mbps Auto-sensing RJ45 ports
- 1 x 10/100/1000Mbps uplink network port
- Built-in voltage booster for DC12-48V input which can be used for
solar power/Trunk/VoIP system/CCTV security system
- 6 KV Ethernet surge protection, adapt to a harsh outdoor
environment
- Support Auto MDI/MDIX
- Flow control mode: full duplex with IEEE 802.3x standard,
half-duplex with Back pressure standard
- IEEE 802.3 10Base-T and IEEE 802.3u 1000Base-TX compliant
- Max power to15.4W under af standard, 30W under at standard to each
PoE port
- Detect the PoE models of electrical equipments.
- Operating environment temperature:-40 ° ~75 ° c
Specification of voltage booster switch
Product Name | 10/100/1000Mbps Industrial POE Network Switch (5TP) |
Model No. | IM-WP054BGE |
Port | 1 x 10/100/1000Mpbs uplink network port 4 x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) |
Switching features | Transmission mode:storage and forward System bandwidth:40Gbps (non-traffic jam) |
Network media | 10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m) |
LEDs | Power, network |
Power supply | POE power supply input voltage: DC12V-48V Single PoE power supply output power: 15.4W (port 1~4) (802.3at standards required special instructions) |
Environment | Working temperature:-40°～ 75°C Storage temperature:-40°～ 85°C Working humidity:10%～90%,non-condensing Storage humidity:10%～95%,non-condensing |
Industry Standards | EMI:FCC Part 15 Subpart B Class A,EN 55022 Class A EMS:EN 61000-4-2 (ESD) Level 3,EN 61000-4-3 (RS) Level 3, EN
61000-4-4 (EFT) Level 3,EN 61000-4-5 (Surge) Level 3, EN 61000-4-6
(CS) Level 3,EN 61000-4-8 Traffic Control:NEMA-TS2 Vibration:IEC 60068-2-6 Freefall:IEC 60068-2-32 Shock:IEC 60068-2-27 Rail Traffic:EN 50121-4 |
Safety | CE Mark ,commercial CE/LVD EN60950 |
Mechanical information | Shell:Corrugated metal shell Safety class:IP40 Dimension: 113.8 x 93 x 34.9mm Mounting method:Din-rail mounting |
Warranty | 3 years |
Packing box of Din rail unmanaged switch:
- Put the product in an ESD Bag, then placed in PE foams with outer
carton packaging.
- The standard packing usually contains a main device, a warranty
card and a user manual.
- Packing box dimension for 1pc: 23*16.5*5.8cm
- 40pcs in a packing box of 67*33*47cm dimension.
FAQ:
1. Q: How does this outdoor PoE switch compare to other standard
POE switches?
A: This outdoor PoE switch 5port Gigabit Ethernet switch has a
built-in voltage booster which enables it to utilize a power input
range of 12-48VDC, whereas typical POE switches support 48VDC input
only.
2. Q: Does this outdoor 5port PoE switch support 24VDC power
output?
A: No, this product doesn't support passive 24VDC PoE devices, and
it supports standard IEEE802.3af/at PoE 48VDC devices only.
3. Q: Does it come with a power adapter?
A: The power adapter is sold separately. You could use one
industrial din-rail power adapter or commercial grade. The voltage
can be 12-48VDC. If need 120W power output, please use 48V 2.5A or
24V 5A power supply.
4. Q: What's the PoE Pin Assignment of this outdoor 5 Ports POE
solar Switch?
A: It supports both 1/2 (V+),3/6 (V-) and 4/5 (V+),7/8 (V-).
5. Q: Can i use it with one Non-PoE devices?
A: Yes, sure. If one Non-PoE devices is connected with this 5port
PoE solar switch, it will provide data only, and don't provide
power any more.
