6 port gigabit unmanaged POE Switch with 2 sfp fiber switch DC48V input

Key Features of Industrial poe fiber switch

• Support power on POE IP cameras through the wireless access point (AP) of 5 categories of Ethernet cable.
• POE output power 15.4W/30W/60W for 1 ~ 4 RJ45 ports
• 4 x 10/100/1000Mbps Auto-sensing RJ45 ports
• 2 x 1000Mbps SFP fiber port
• 6 KV Ethernet surge protection, adapt to a harsh outdoor environment
• Support Auto MDI/MDIX
• Flow control mode: full duplex with IEEE 802.3x standard, half-duplex with Back pressure standard
• IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant
• A store-and-forward switching mechanism
• Operating environment temperature:-40 ° ~75 ° c

Specification of Industrial Full Gigabit Switch

Industry Standards

• EMI:FCC CFR47 Part 15,EN55022/CISPR22,Class A
• EMS:IEC61000-4-2(ESD) ±8kV(contact),± 15kV(air)
• IEC61000-4-3(RS) 10V/m(80MHz～2GHz)
• IEC61000-4-6(CS) 3V(10kHz～150kHz);10V(150kHz～80MHz)
• IEC61000-4-16 30V(cont.),300V(1s)
• IEC60068-2-6, IEC60068-2-27, IEC60068-2-32
• IEC61000-6-2 EN50155,EN50121-4 NEMA TS-2

Application

Production Steps

• Welding: Weld the necessary components
• Cleaning: To avoid any possible dysfunction due to dust or scraps on the PCB boards.
• Assembling: Builds up components of a product, like panels, screws, PCB boards.
• Testing: To make sure the product is basically working fine after assembling
• Aging: To check if the product can work smoothly for long time without any minors such as LED indicators, voltage. This will usually last for 24 to 48 hours.
• Testing: To test if the product can process data or video signals correctly. Any data loss? Transmission rate correct? Any data packet failure? Such questions would be verified in this procedure.
• QC testing: This is the third and also last check of product quality. If it goes good, our packing staff will pack it up according to customer requirements and attach to the packing box a product label.
• When all above is done, the product will go to market.