Industrial Managed Ethernet Switch 8 Port
Key Features of Managed Network Switch
- 8 x 10/100/1000Mbps Auto-sensing RJ45 ports
- 2 x 100/1000/2500Mbps SFP fiber port
- 6KV Ethernet surge protection, adapt to a harsh outdoor environment
- Meet IP40 protection degree and EMC industrial grade requirements
- DIN rail or Wall installations
- Power range up to 100 meters
- Comply with FCC and CE standards
- Operating environment temperature: -40°C～75°C
Specification of 2.5G Fiber Switch
| Product Name | 10/100/1000Mbps Managed Industrial Fiber Switch(2F+8TP) |
| Model No. | IM-FS280GW |
| Port | 2*100/1000/2500Mpbs SFP ports SM: 1310nm/1550nm, 20Km; 1490nm/1550nm, 40~120Km MM: 1310nm, 2Km; 850nm, 500-meter 8*10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) |
| Protocol | IEEE 802.3 IEEE802.3U IEEE802.3ab IEEE802.3z IEEE802.1d STP IEEE802.1w RSTP IEEE802.1s MSTP ITU-T G.8023 EPR/Y.1344 IEEE802.1Q IEEE802.1X IEEE802.3ad IEEE802.3x IEEE802.1ad IEEE802.1p IEEE802.1ab IEEE802.3az |
| Switching Features | Transmission mode: storage and forward Forwarding delay: <10us System bandwidth: 26Gbps(non-traffic jam) Forwarding rate: 19.344Mpps DRAM size: 128M Flash size: 16M
Packet buffer size: 4Mb VLAND ID: 4096 MAC Address Table Size: 8K Jumbo Frame: 9.6KB |
| Network Media | 10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m) |
| LEDs | Power, network, fiber PWR: Power
Orange: Link/ACT Green: 1000M Network Speed(off when it is 100Mb/s)
Fiber: FX1/FX2 |
| Power Supply | Input voltage: DC12V~DC52V Reverse connection: support |
| Environment | Working temperature: -40°C～75°C Storage temperature: -40°C～85°C Working humidity: 10%～90%, non-condensing Storage humidity: 10%～95%, non-condensing |
| Industry Standards | ESD: IEC61000-4-2, ±15KV air, ±6KV contact EFT: IEC61000-4-4, General ±6KV Surge: IEC61000-4-5, Differential ±2KV, Common±6KV |
| Certification | CE-EMC: EN 55032:2015+AC: 2016+A1:2020+A11: 2020 EN 55035:2017+A11: 2020/EN IEC 61000-3-2:2019/A1: 2021 EN 61000-3-3: 2013/A2: 2021/AC:2022 CE-LVD: EN IEC 62368-1: 2020+A11:2020 FCC: 47 CFR FCC Part 15 Subpart B(Class B) ANSI C63.4: 2014 |
| Mechanical information | Shell: Corrugated metal shell, IP40 grade level Dimension: 158*115*60mm Mounting method: Din-rail/Wall mounting Weight: 0.75Kg/0.9Kg(Net/Gross) |
| Warranty | 3 years, lifetime technical support |
- Support cable diagnosis and can locate the fault point
- Support IEEE802.3az EEE(Energy Efficient Ethernet) Management,
optimize power consumption
- Support STP, RSTP, MSTP, ITU-T G.8032 Ethernet Protection Ring(EPR)
- Support QoS, transport classification QoS, CoS, bandwidth
control(input/output direction), storm suppression, differentiated
services
- Support IEEE802.1q VLAN, VLAN port, based Mac VLAN, IP subnet VLAN,
Protocol VLAN, VLAN convert, MVR
- Support dynamic IEEE802.3ad LACP link aggregation, static link
aggregation
- Support IGMP/MLD snooping V1/V2/V3, IGMP filtrating/ modulating,
IGMP searching
- Support IGMP agent report, MLD snooping
- Safety: based on port and Mac IEEE802.1X, RADIUS, ACL, TACACS+,
HTTP/HTTPS, SSL/SSH v2
- Support Cisco® like CLI, Web management, SNMP v1/v2c/v3, Telnet
- Support software upgrade via TFTP and HTTP, firmware redundancy
prevents upgrade failing
- Support DHCP client/Relay/Snooping/Snooping option 82/Relay option
82
- Support RMON, MIB II, mirror image, event log, DNS, NTP/SNTP,
IEEE802.1ab LLDP
- Support IPV6 Telnet server/ICMP v6, SNMP, HTTP, SSH/SSL, NTP/SNTP,
TFTP, QoS, ACL
Please contact us for web manual or CLI manual
Packing List of Industrial Fiber Switch
- One Managed Fiber Switch, one console cable, one user manual, and
one warranty card are in one box.
- 20pcs boxes are in one carton. (55.5*40*43cm)
Warranty & Guarantee
1. All the products we offer are brand new with new components and
parts, and we absolutely never use old and refurbished materials.
2. 36 Months Manufacturer Warranty (Excluding contrived damage or
misusage). All the products have been passed the functional test
and aging test before delivery.
3. If there is any compatibility problem or any quality problem,
the goods can be returned to us to repair or replace. The buyer
should be responsible for all the charges of returning and second
shipping.
Quality Control
- All the products we offer are brand new with new components and
parts, and we absolutely never use old and refurbished materials.
- Every production process has a special person to test to ensure
quality
- Every product must be tested before shipping to our customers. The
quality is attached to great importance during the whole production
process.
- All products have passed CE, FCC, ROHS, and other certifications
FAQ
Q: Is this a managed switch?
A: Yes, this is an L2 managed POE switch for industrial fiber optic
networks.
Q: Does this managed switch include the power supply?
A: No, no power adapter is included.
Q: What temperature range can this switch reach?
A: The operating temperature is -40~75℃
Q: Can I get a sample?
A: We can provide samples, feel free to contact me to talk about
more details.
Q: Do you provide OEM service?
A: Yes, we provide OEM service. If you have requirements about the
customized product, we also provide it.
Q: Is a small DIN rail included?
A: This is a DIN rail switch, but the DIN rail is not included.
Q: Do you have CE, FCC, ROHS?
A: Yes.
Q: How do you guarantee the quality?
A: we absolutely never use old and refurbished materials. Always a
pre-production sample before mass production; 48 hours aging test
before delivery. Always final Inspection before shipment.
Application of ERPS Ring Managed Switch
