Web-Managed Gigabit Industrial Outdoor Poe Switch For Ip Video
Surveillance
Introduction of Industrial Fiber Switch
IM-FP244GW series is the 10/100/1000 Mbps SFP Web-Managed Poe Switch, comply with IEEE802.3af/at, power on
POE IP cameras through the Ethernet cable, simple construction,
power range up to 100 meters, operating temperature-40 ℃ to + 75 ℃,
meet IP40 protection degree and EMC industrial grade requirements,
DIN rail installation, pass through dangerous environmental
certification and comply with FCC and CE standards. The reliable
industrial grade design could ensure continuous and stable
operation of the automation system.
Key Features of Industrial Fiber Switch
Support power on POE IP cameras through the wireless access point
(AP) of 5 categories of Ethernet cable.
IEEE 802.3af/at power on to 1 ~ 4 RJ45 ports
4 x 10/100/1000Mbps Auto-sensing RJ45 ports
2 x 1000Mbps SFP fiber port
- 6KV Ethernet surge protection, adapt to a harsh outdoor environment
- Support Auto MDI/MDIX
- Flow control mode: full duplex with IEEE 802.3x
standard,half-duplex with Back pressure standard
- IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant
- A store-and-forward switching mechanism
- Operating environment temperature:-40 ° ~75 ° c
- Support cable diagnosis and can locate the fault point
- Support IEEE802.3az EEE (Energy Efficient Ethernet) Management,
optimize power consumption
- Support STP, RSTP, MSTP, ITU-T G.8032 Ethernet Protection Ring(EPR)
- Support Qos, transport classification Qos, Cos, bandwidth control
- (input/output direction), storm suppression ,differentiated
services
- Support IEEE802.1q VLAN,VLAN port ,based Mac VLAN,IP subnet VLAN,
- Protocol VLAN,VLAN convert, MVR
- Support dynamic IEEE802.3ad LACP link aggregation, static link
aggregation
- Support IGMP/MLD snooping V1/V2/V3, IGMP filtrating/ modulating,
IGMP searching
- Support IGMP agent report, MLD snooping
- Safety: based on port and Mac IEEE802.1X, RADIUS, ACL,
TACACS+,HTTP/HTTPS, SSL/SSH v2
- Support Cisco® like CLI, Web management, SNMP v1/v2c/v3, Telnet
- Support software upgrade via TFTP and HTTP, firmware redundancy
prevents upgrade failing
- Support DHCP client/Relay/Snooping/Snooping option 82/Relay option
82
- Support RMON, MIB II, mirror image, event log, DNS, NTP/SNTP,
IEEE802.1ab LLDP
- Support IPV6 Telnet server /ICMP v6, SNMP, HTTP, SSH/SSL,
NTP/SNTP,TFTP, QoS, ACL.
Specification of Industrial Fiber Switch
| Product Name | Sfp Web-Managed Gigabit Industrial Outdoor Poe Switch (2F+4TP) |
| Model No. | IM-FP244GW |
| Port | 2 x 1000Mpbs SFP port SM:1310nm/1550nm,20Km ;1490nm/1550nm, 40~120Km; MM:1310nm, 2Km; 4x 10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) |
| Standard | IEEE 802.3, IEEE802.3U, IEEE802.3ab, IEEE802.3z, IEEE802.1d STP,
IEEE802.1w RSTP, IEEE802.1s MSTP, ITU-T G.8023 EPR/Y.1344,
IEEE802.1Q, IEEE802.1X, IEEE802.3ad, IEEE802.3x, IEEE802.3af,
IEEE802.3at, IEEE802.1ad, IEEE802.1p, IEEE802.1ab, IEEE802.3az |
| VLAND ID | 4096 |
| Jumbo Frame | 9.6KB |
| MAC Address Table Size | 8K |
| Switching features | Transmission mode:storage and forward System bandwidth:40Gbps (non-traffic jam) |
| Network media | 10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m) SFP port,transmission distance: 20Km,40Km,60Km,80Km,100Km |
| LEDs | Power, network,fiber |
| Power supply | POE power supply input voltage: 48V (max 52V), Single PoE power supply output power: 15.4W (port 1~8) (802.3at standards required special instructions) |
| Environment | Working Temp:-40°～ 75°C ; Storage Temp:-40°～ 85°C;Working
humidity:10%～90%, non-condensing; Storage humidity:10%～95%,
non-condensing |
| Industry Standards | EMI:FCC Part 15 Subpart B Class A,EN 55022 Class A EMS:EN 61000-4-2 (ESD) Level 3,EN 61000-4-3 (RS) Level 3, EN
61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3, EN 61000-4-6
(CS) Level 3, EN 61000-4-8; Traffic Control:NEMA-TS2; Vibration:IEC
60068-2-6; Freefall:IEC 60068-2-32; Shock:IEC 60068-2-27; Rail
Traffic:EN 50121-4 |
| Safety | CE Mark ,commercial ; CE/LVD EN60950 |
| Mechanical information | Shell:Corrugated metal shell; Safety class:IP40; Dimension:158 x 114.8 x 60mm; Mounting method:Din-rail mounting |
| Warranty | 3 years |
Application Of Industrial Fiber Switch
Package Of Industrial Fiber Switch
1. One product, one console cable, one user manual, and one warranty
card are inside one box.
2. Twenty pieces of boxes are in one carton.
FAQ Of Industrial Fiber Switch
Q1.Can we get a sample?
Yes, but we need to charge for samples.
Q2.Can you offer a better price? Any discount?
Yes, price is not a problem, more quantity more attractive price.
Q3.Do you have MOQ?
No, OLYCOM provides good OEM/OEM service to our customers.
Q4.OEM, ODM Service is available?
Yes, OLYCOM provides good OEM/ODM service to our customers.
Q5.Can you take care for the shipment?
We will organize and schedule all shipping to your office if you
want.
Q6.Lead time?
Sample order, 3-5 works days, bulk order, 7-30 work days after
getting deposit.
Q7.What is your warranty period?
Industrial Product: The warranty period is 3 years
This warranty does not cover damage caused by man-made damage,
improper care, negligence, normal wear tear, and force majeure such
as natural disasters, earthquakes, fires, etc.
