16port POE Switch Layer 2 VLAN Hardened Fiber Optic Switch With Din Rail Mounted

Introduction

IM-FP888GW series is the 10/100/1000 Mbps 10 Port Lan Industrial Managed POE Switch, complies with IEEE802.3af/at, power on POE IP cameras through the Ethernet cable, simple construction, power range up to 100 meters, operating temperature-40 ℃ to + 75 ℃, meet IP40 protection degree and EMC industrial grade requirements, DIN rail installation, pass through dangerous environmental certification and comply with FCC and CE standards. The reliable industrial-grade design could ensure continuous and stable operation of the automation system.

Key Features

1. Support power on POE IP cameras through the wireless access point (AP) of 5 categories of Ethernet cable.

2. IEEE 802.3af/at power on to 1 ~ 8 RJ45 ports

3. 8 x 10/100/1000Mbps Auto-sensing RJ45 ports

4. 8 x 1000Mbps SFP fiber port

5. 4KV Ethernet surge protection, adapt to a harsh outdoor environment
6. Support Auto MDI/MDIX
7. Flow control mode: full duplex with IEEE 802.3x standard, half-duplex with Back pressure standard
8. IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant
9. A store-and-forward switching mechanism
10. Operating environment temperature:-40 ° ~85 °
11. Support cable diagnosis and can locate the fault point
12. Support IEEE802.3az EEE (Energy Efficient Ethernet) Management, optimize power consumption
13. Support STP, RSTP, MSTP, ITU-T G.8032 Ethernet Protection Ring(EPR)
14. Support QoS, transport classification Qos, Cos, bandwidth control
15. (input/output direction), storm suppression,differentiated services
16. Support IEEE802.1q VLAN,VLAN port,based Mac VLAN, IP subnet VLAN,
17. Protocol VLAN,VLAN convert, MVR
18. Support dynamic IEEE802.3ad LACP link aggregation, static link aggregation
19. Support IGMP/MLD snooping V1/V2/V3, IGMP filtrating/ modulating, IGMP searching
20. Support IGMP agent report, MLD snooping
21. Safety: based on port and Mac IEEE802.1X, RADIUS, ACL, TACACS+,HTTP/HTTPS, SSL/SSH v2
22. Support Cisco® like CLI, Web management, SNMP v1/v2c/v3, Telnet
23. Support software upgrade via TFTP and HTTP, firmware redundancy prevents upgrade from failing
24. Support DHCP client/Relay/Snooping/Snooping option 82/Relay option 82
25. Support RMON, MIB II, mirror image, event log, DNS, NTP/SNTP, IEEE802.1ab LLDP
26. Support IPV6 Telnet server /ICMP v6, SNMP, HTTP, SSH/SSL, NTP/SNTP,TFTP, QoS, ACL.

Specification

Photo

FAQ

Q: Are you a manufacturer or trading company?
A: OLYCOM is a manufacturer of fiber optic transmission products since 2003.

Q: Do you provide customized service?
A: Yes, sure. If you have any requirements, kindly contact our sales for details.

Q: Is the 16port switch packed with a power adapter
A: Usually, industrial products are sold without a power adapter, but if you need one, we also can provide.